WinSystems Industrial Compact Flash Cards

Industrial CompactFlash Cards - RoHS Compliant

GENERAL

Compact Flash Type I Density up to 8 GB (16 GB coming soon)
Solid State Data Storage
32-bit RISC Controller
Dual 3.3V / 5V Interface
Fixed Disk Operation
Specialized for High Reliability

PERFORMANCE

True IDE Mode Capable
- PIO Mode 0-4
- DMA Mode 0-2
ATA-3 Compliant
High Performance 16.7 MB/s Burst

RELIABILITY

> 2,000,000 Program/Erase Cycles
On-Board ECC

Corrects up to 6-bytes/Sector

Industrial Wear Leveling

Leveling Static & Dyanamic Data

Spares & Bad Block Management
High Environmental Tolerance
- Shock: 2000 G (max)
- Vibration: 16.3 G rms
- Altitude: 80,000 ft
- -40°C to +85°C Temperature Operation
- Unlimited Reads
- 10-Year Data Retention

COMPATIBILITY

CFA Spec, 2.0/2.1
PCMCIA PC Card STandard, 7.0, February 1999
PCMCIA PC Card ATA Spec, 7.0, February 1999
Low Power Consumption
RoHS Compliant

CONFIGURATION OPTIONS

Data Programming Service
NOTE: 1. See Section 5.0 for Configuration & Ordering Guide

Datasheet | CFA Specification

OVERVIEW

The WinSystems CFLASH-xxxx-I series of Industrial Grade CompactFlash TM Memory Cards are constructed with Samsung NAND-type single-level-cell (SLC) flash memory devices paired to a powerful 32-bit RISC/DSP-based system controller for virtual-to-physical address mapping and other flash management functions.

WinSystems Industrial CompactFlash Cards employ a variety of sophisticated error checking and flash management utilities allowing for levels of reliability and endurance in excess of the physical NAND Flash. Patented static and dynamic wear-leveling methods ensure even wear of flash blocks across the entire card capacity. Background operations track erase counts, prioritize new writes to blocks with lower wear, and relocate static data to blocks with higher wear. Bad-block Management routines replace worn blocks with spare blocks reserved by the controller on card initialization. Reed-Solomon based ECC algorithms capable of detecting and correcting up to 6-bytes per 512-byte sector are implemented on the fly without performance degradation to ensure data reliability through user data transfers and background wear-leveling operations.

Industrial grade reliability, industry standard compatibility, and the ability to emulate IDE hard disk drives make WinSystems CompactFlash Cards ideal for industrial, military, and other high endurance applications.

Detailed technical specifications are provided in the PDF datasheet below.

ORDERING INFORMATION

Product Model
Part Number	Description
CFLASH-G-128M-I	128 MB Industrial CompactFlash, RoHS Compliant
CFLASH-G-256M-I	256 MB Industrial CompactFlash, RoHS Compliant
CFLASH-G-512M-I	512 MB Industrial CompactFlash, RoHS Compliant
CFLASH-G-1024-I	1 GB Industrial CompactFlash, RoHS Compliant
CFLASH-G-2048-I	2 GB Industrial CompactFlash, RoHS Compliant
CFLASH-G-4096-I	4 GB Industrial CompactFlash, RoHS Compliant
CFLASH-G-8192-I	8 GB Industrial CompactFlash, RoHS Compliant

DOWNLOADS

PDF Datasheet
Printable datasheet in PDF format	CompactFlash